Mainly used for asphalt or cement surface galling or milling. Use small road milling machine.
Application range:
1, waterproof deck surface roughening, beam flatness and waterproof processing high-speed railway box girder.
2, the asphalt pavement rutting, Chung bag, net, milling pit groove clearance. Clear the deck and pavement snow.
3, the new shop on the asphalt concrete pavement in front of the old mild napping, or with large milling machine to complete the corner region and reinforced with regional milling picking operation.
4, the removal of surface coating, paint, all kinds of traffic line markings; ground damage, pollution needs renovation, the removal of the old floor surface.
5, remove the airport road marking, runway tire braking trace and so on, to obtain a rough surface friction coefficient is very high.
6, the cement asphalt pavement, bridge, highway bridge fault, high elevation sites epoxy resin wear-resisting floor milling leveling
7, the road of Micro-surfacing construction, to the original old pavement surface milling clear, ready for the slurry seal.
GM-K165
Milling width165mm
Milling depth0-2mm/
Engine1.1KW
Blade:TD165Blade:DS10-178 5PCS,Middle:round 12.7×12.7mm
Blade working range30-36mm
Machine size680×330×1000mm
Net weight33KG
Package size700×350×1150mm
GM-K200(C):
Milling width200mm
Milling depth0-3mm
Engine2.2KW
Blade:TD200Blade:DS12-222 4PCS,Middle:round:19 mm
Blade working range40-48mm
Machine size950×440×900mm
Net weight62KG
Package size960×450×1030mm
GM-K200(B):
Milling width200mm
Milling depth0-3mm
Engine5.5HP gasoline
Blade:TD200blade:DS12-222 4PCS,Middle:round:19 mm
Blade working range40-48mm
Machine size950×440×900mm
Net weight58KG
Package size960×450×1030mm
GM-K200(A):
Milling width200mm
Milling depth0-3mm
Engine5HP DIESEL
Blade:TD200BLADE:DS12-222 4PCS,Middle:round:19 mm
Blade working range40-48mm
Machine size950×440×900mm
Net weight74KG
Package size960×450×1030mm
GM-250(C):
Milling width250mm
Milling depth0-4mm
Engine5KW/7.5KW
Blade:TD250BLADE:DS12-270 6PCS,Middle:round 36.2mm
Blade working range46-58mm
Machine size1650×560×1160mm
Net weight132.5KG
Package size1085×570×1290mm
GM-250(B):
Milling width250mm
Milling depth0-4mm
Engine9HP13HP GASOLINE
Blade:TD250BLADE:DS12-270 6PCS,Middle:HEX 36.2mm
Blade working range46-58mm
Machine size1650×560×1160mm
Net weight101KG
Package size1085×570×1290mm
GM-250(A):
Milling width250mm
Milling depth0-4mm
Engine9HP DIESEL
Blade:TD250BLADE:DS12-270 6PCS,MIDDLE: HEX 36.2mm
Blade working range46-58mm
Machine size1650×560×1160mm
Net weight123KG
Package size1085×570×1290mm
Audited Supplier 
){kind=link}
){kind=link}