YSP45 stoper rock drill drilling/OEM /IN FACTORY PRICE
Operational Manual
Instruction
The YSP45 stoper rock drill drilling in quarry and coal or lineston mine. It's robust design for tough working condition. It has high inpaxct frequency and is mainly used for producting drilling, raise driving, bolting and other defence project facility. It's high efficiency, upward(60-90 degree) drilling, tough working condition blasting.
Specification:
Weight: 44kg
Length 1420*390*160mm
Cylinder Dia 95mm
Piston Stroke 47mm
Air Leg Push Stroke 750mm
Leg cylinder inner Dia 74mm
Work pressure 0.4-0.63Mpa
Air consumption 83L/S
Impact frequency 47Hz
Rotation Speed 350r/min
Air pressure 0.5Mpa
Air Pipe Inner Dia 25mm
Water Pipe Inner Dia 13mm
Hole Drilling Dia 34-42mm
Max Deepth 5m
ShankSize H22*108mm
FY250A Oil Lubricator:
Weight 2.5kg
Oil Capacity 0.52L
Working Manual
YSP45 Stoper rock drill operate by the air compress repeatedly. The pistion stroke the shank, and then piston turning with the shank. The adjust pressure valve of back head control the pusher, the air leg to inlet air by adjust pressure valve.
YSP45 Stoper rock drill operate by the air compress repeatedly.The pistion stroke the shank,and then piston turning with the shank.The adjust pressure valve of back head control the pusher,the air leg to inlet air by adjust pressure valve.
- Machine should be oiled by the rustproof grease, before using. On using, reoil machine and assemble it .
- When connecting water pipe and air pipe, blow off dirty to protect parts.
- Before open machine, should inspect the flexibility and reliability of all control structure and operation part; oil reservoir be filled with lubrication, and measure oil quantity well, ensure mahine run regularly.
- When finishing using machine,cut off water supply and let machine run slowly ,then blow off the rest moisture to avoid rusting parts.
- The machine which often use, should pay attention to maintenance. Examine and repair every week at least, Clean the dirty within the machine and note to replace and change the damage and invalidation parts, eliminate the malfunction and hidden trouble.
- If machine should store for a long time, diamantle machine for clean, oil and seal , then placed a dry place.
- Lubrication
Lubrication has great influence in the performance and working life.Do not operate machine without lubricating oil
Temperature |
Name |
No |
Flash point |
Kinematic viscosity |
Solidifying point |
Standard |
10-30ºC |
Machine oil |
N46 |
180ºC |
41.4-50.6(40ºC) |
-10ºC |
GB443-84 |
-10-10ºC |
Machine oil |
N22 |
170ºC |
19.8-24.2(40ºC) |
-15ºC |
GB443-84 |
-30-30ºC |
Refrigerator oil |
HD-13 |
160ºC |
11-15(50ºC) |
-40ºC |
Y1213-79 |