G10 Pneumatic Pick, Pick Hammer

• Customization: Available
• Condition: New
• Customized: Non-Customized
• Model NO.: G10
• Impact Energy: 10 ft-lbs
• Type: Air Hammer
• Vibration Control: Anti-vibration Handle
• Specify: OEM
• Air Wrench Type: Pulse Pneumatic Wrench
• Pneumatic Drill Range: Rock
• Degree of Automation: Semi-Automatic
• Screwdriver Startup Mode: Hand Press
• Usage: Road Break
• Working Style: by Air
• Brand: GM
• Transport Package: Wood Case and Cartons
• Specification: CE
• Trademark: GM
• Origin: China
• HS Code: 84671900
• Production Capacity: 1000set/Year
• Package Size: 15.00cm * 12.00cm * 8.00cm
• Package Gross Weight: 10.000kg

Product Description

G10 Pneumatic Pick
Instruction
G10 pneumatic pick is suitable for drilling in mine, crushing incompetent bed, concrete and clay, destroying hard or frozen stratum and other athletics occasion which need impact.
Technical Specification
Total Length                                                     570mm
Weight                                                          10kg
Rammerweight                                                    0.9kg
Rammer dia                                                       38mm
Rammer stroke                                                    155mm
Air pressure                                                     0.63Mpa
Impact energy                                                        43J
Impact frequency                                                    16Hz
Air consumption                                                    26L/s
Air pipe inner dia                                                   16mm
Drill                                                             500mm
Maintenance
Pneumatic pick is a exactitube tool that make reciprocating impact, should pay attention to maintenance.
Please abide the following maintenance rules.
1, Air pipe inner dia is 16mm and length is not excess 12 m, the air pressure should be kept at 0.5-0.6Mpa, and keep air pipe clean and fasten hose nipple.
2, When assembling machine, check clearance between drill shank and fixing sleeve, hold handle and force pressure to it slowly, ensure that work normally.
3, Working regularly, oil machine through the pipe connecter every 2-3 hours(3-4.5°E50 turbine oil)
4, Do not insert the whole machine into ledge,when drilling incompetent bed.
5, When machine was jammed in crevice, do not draw out it powerfully, it will damage machine.
6, If dirty block strainer, romove it.Don't take off strainer.
7, When using machine,dismantle it at least twice a week, use diesel oil to clean and dry, then oil, later assemble and operate machine.
8 ,If machine should stop for along time, dismantle and clean it, then oil and keep in storehouse.
Parts And Illustrations

No	Part No	Name	Qty
1	G10-1	Pick handle	1
2	G10-2	Pick handle spring	2
3	G10-3	Clogging valve	1
4	G10-4	Clogging valve spring	1
5	G10-5	Valve chest backing	1
6	G10-6	Valve core	1
7	G10-7	Valve chest	1
8	G10-8	Setting pin	2
9	G10-9	Connector sleeve	1
10	G10-10	Breakwind sleeve	1
11	G10-11	Rammer	1
12	G10-12	Cylinder	1
13	G10-13	Drill sleeve	1
14	G10-14	Front head spring	1
15	G10-15	Connection hose	1
16	G10-16	Connection hose pad	1
17	16-3201	Nut	1
18	2-3208	Setting pin	1
19	16-3203	Hose connector	1
20	G10-20	Drill	1